Forklift Man Cage Safety Requirements

Must be manufactured in accordance with australian standard as 2359 1.

Forklift man cage safety requirements.

The mast must remain vertical. Two metre high guard must be fitted to the back of the platform. Designed to the applicable requirements of nzs ansijitsdf b56 1 2005 safety standards for low lift and high lift trucks our forklift cages are designed with two fall restraint anchorage points for securing to the forklift a mesh fence to prevent contact with the forklift s mast safety railing on the remaining three sides a latch swing gate for access and kickboards to stop feet slipping over the platform s edge. When occasionally using forklift trucks to elevate personnel on a secured safety platform what requirements would an employer be required to follow if 1910 67 does not apply.

The platform must remain horizontal and centred do not use sideshift or tilt. In the situation described the employer must follow the requirements of 1910 178. Ansi b56 1 section 7 37 provides details on rules and regulations regarding baskets. Ensure the platform is securely attached to the forks or carriage or load back rest.

Here s a summary of some of the most important requirements for forklift work platforms and forklift man baskets. Meets all osha requirements when used with a full safety harness and lanyard. Our safety man baskets are designed to lift personnel in the air with a forklift. Forklift man cage safety checklist.

Must have guardrails mid rails and kick boards fitted. Gates must open inwards only with spring loaded latch installed for automatic closing. How do you know if your forklift man basket is osha and ansi itsdf compliant. Man baskets must be surrounded by a guard rail that way that platform.

The forklift must have firm and level footing. Built to meet osha standards the safety man basket features a diamond tread plate floor 42 high tubular sides front latching door 60 high mesh enclosed backing 4 high kick plate and provisions for a safety harness hook up. This is expressly forbidden by osha 451 c 2 v and something that most operations avoid in the first place.