Ford Fe Head Casting Numbers Location

In 1965 this number was changed to c5ae 6015 e for the 289 2v 4v and hi po note the change to full size ford designation and 6 bolt bell housings.

Ford fe head casting numbers location.

Ex port 1 84 x 1 28. If you have the valve cover off look for any code number at either end of the head. Look for three different locations where your ford cylinder head code number will be located. The 221 260 289 were originally designed for the fairlane and produced only in the cleveland engine plant from 1962 1965.

One thing to note is that due to the general numbering scheme of ford s casting numbers you can have the same major casting number for two completely different applications. With the exception of a few hi performance 428 blocks most all other fe blocks are identical externally. This list shows pretty nearly all non performance fe head casting numbers. Ford and mustang cylinder heads 6090 5752143.

Fe 330 428 scj note. Locating the casting number is relatively easy if you re physically fit and have some dexterity. On the bottom of the head requiring the head to be removed. On top of the head under the valve cover.

Here we have the venerable e7te pa 5 0l head. The 1964 289 casting number for all 289s was c4oe 6015 c later an f suffix. Nearly all fe blocks have 352 cast on the front of them. The casting numbers on the block of a ford engine help identify the specific engine.

The numbers are often useful in mating cylinder heads determining when and where the block was manufactured and into which mode of ford it was installed. There may be another 1966 67 marine variant and there are some 1966 67 truck variants that are not listed. Solid lifters 2 core plugs at front of block 4 in rear and 3 on each side. In port 2 34 x 1 34.

Also the detail description is lacking but the intent was to find the casting numbers not precisely describe it. Fyi a majority of fe blocks have either a 352 or a backwards 501 cast into the front of the block. Derived from the ford edsel name the fe is bigger than a small block but smaller than a big block earning it the moniker of a medium block it was designed to be a replacement for the y block in the 1958 ford line it persevered until 1978 and came from the factory in displacements ranging from 332 cubic inches. How to locate a ford engine s casting numbers.

Valves 2 02 1 55. And on the side of the head just under the valve cover lip. Solid lifters 2 core plugs at front of block 4 in rear and 3 on each side.